The maintenance of the pipeline crawler camera is not only the guarantee the life time of the crawler camera, but also the responsibility for the urban underground pipeline.
![](https://www.jiutaiendoscope.com/wp-content/uploads/2023/12/453.jpg)
![](https://www.jiutaiendoscope.com/wp-content/uploads/2023/12/452.jpg)
1. After the inspect is completed, Clean the dirt on the surface of the equipment with clean water and wipe it with a clean towel, and put it back in place according to the packaging requirements; Do not allow the device to be squeezed, bumped or impacted, which may cause unnecessary damage. Crawler camera head, display dust cleaning should be a clean cotton ball dipped in anhydrous alcohol from inside to outside rotation wipe;
2. Handheld wireless tablet or intelligent controller needs to be charged in time, long-term placement when not in use, at least 3 months charge and discharge once;
3. After the equipment is completed, when the internal heat is high, it should be placed into the box after 5-10 minutes, and the dustproof cover corresponding to each joint is covered well;
4. The control system work for 6 months, to timely routine maintenance, check the cooling fan and dust removal work;
5. After the working time of the crawler is 100 hours, the screws of the structural parts should be tightened, long-term placement of more than 6 months, the oil in the machine should be changed, and the sealing status should be checked.